Cisco Cisco MDS 9000 NX-OS Software Release 5.0 Notas de publicación
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
37
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4)
OL-21012-02
Caveats
–
Syslog messages display the error string PSS_VERSION_MISMATCH for the configuration of
an internal service (ilc_helper)
an internal service (ilc_helper)
–
After the ISSD completes and the switch comes up with the NX-OS 4.x release, an internal
process (ilc_helper) fails.
process (ilc_helper) fails.
Workaround: This issue is resolved.
•
CSCtg11776
Symptom: On a switch where AAA remote authentication was configured, scheduled jobs started
failing approximately 24 to 48 hours after they were configured because the scheduler
aaa-authentication command did not appear in the running configuration.
failing approximately 24 to 48 hours after they were configured because the scheduler
aaa-authentication command did not appear in the running configuration.
Workaround: This issue is resolved.
•
CSCtg61169
Symptom: Users are no longer able to log in to an MDS 9000 switch via SSH. The following error
is seen in the log file:
is seen in the log file:
unable to lock password file
At the same time the /dev/root file system is 100 percent in use.
This symptom might occur if there are many HTTP requests that go to the built-in MDS web server.
The log file of the service continues to grow until it consumes all available space in /dev/root.
The log file of the service continues to grow until it consumes all available space in /dev/root.
Workaround: This issue is resolved.
•
CSCtg86355
Symptom: Quoted strings are not permitted in a Call Home configuration for the following values:
customer ID and site ID.
customer ID and site ID.
Workaround: This issue is resolved.
•
CSCth20253
Symptom: The data path processor engine on the MSM-18/4 module occasionally fails after an
exchange error occurs between an initiator and target in an IOA cloud. The error occurs because the
tape write takes a long time to complete and IOA on the target side MDS 9000 switch tries to abort
the exchange.
exchange error occurs between an initiator and target in an IOA cloud. The error occurs because the
tape write takes a long time to complete and IOA on the target side MDS 9000 switch tries to abort
the exchange.
Workaround: This issue is resolved.
•
CSCth21404
Symptom: IP DNS name resolution might be slow. For example, AAA or TACACS+ authentication
might time out when the AAA or TACACS+ servers are configured by name. This symptom might
be seen when the IP DNS name servers are functioning properly.
might time out when the AAA or TACACS+ servers are configured by name. This symptom might
be seen when the IP DNS name servers are functioning properly.
Workaround: This issue is resolved.
•
CSCth71977
Symptom: LDAP remote authentication will fail if you configure a user with multiple roles and one
of the roles is invalid. In such a scenario, AAA skips the invalid role and applies the identifiable
roles, but SNMP applies the default network-operator role upon encountering an invalid role.
of the roles is invalid. In such a scenario, AAA skips the invalid role and applies the identifiable
roles, but SNMP applies the default network-operator role upon encountering an invalid role.
Workaround: This issue is resolved.
•
CSCti06878
Symptom: An MDS 9222i switch failed with following reason:
switch# show system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---