Cisco Cisco MDS 9000 NX-OS Software Release 4.2 Notas de publicación
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
51
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(7a)
OL-19964-08
Related Documentation
2.
Delete the SCSI flow configuration from the switch. In configuration mode, enter the following
command:
command:
switch(config)# no scsi-flow flow-id <flow-id>
Enter this command separately for each configured SCSI flow.
3.
Re-create the SCSI flows. In configuration mode, enter the following command:
switch(config)# scsi-flow flow-id <flow-id> initiator-vsan <initiator-vsan>
initiator-pwwn <initiator-pwwn> target-vsan <target-vasn> target-pwwn <target-pwwn>
4.
Enable SCSI flow statistics and Fibre Channel write acceleration by entering the following
commands:
commands:
switch(config)# scsi-flow flow-id <flow-id> statistics
switch(config)# scsi-flow flow-id <flow-id> write-acceleration>
•
CSCtn68418
Symptom: When you try to save a configuration, you might see the following message:
switch# copy run start
[########################################] 100%
Configuration update aborted: request was aborted
%DAEMON-3-SYSTEM_MSG: ntp:can't open /mnt/pss/ntp.drift.TEMP: No space left on
device
- ntpd[xxxx]
%PLATFORM-2-MEMORY_ALERT: Memory Status Alert : MINOR
%PLATFORM-2-MEMORY_ALERT: Memory Status Alert : MINOR ALERT RECOVERED
`show system internal flash` output will display /isan as 100% full.
Mount-on 1K-blocks Used Available Use% Filesystem
/ 204800 54624 150176 27 /dev/root
/proc 0 0 0 0 proc
/isan 409600 409576 24 100 none
This symptom was seen because the Call Home feature had duplicate message throttling disabled
and there were flapping interfaces that generated thousands of Call Home messages. These
messages filled up the ISAN directory.
and there were flapping interfaces that generated thousands of Call Home messages. These
messages filled up the ISAN directory.
Workaround: To work around this issue, enable Call Home duplicate message throttling. If you find
that the /isan directory is 100 percent full, open a TAC case to get assistance with deleting the files.
that the /isan directory is 100 percent full, open a TAC case to get assistance with deleting the files.
Related Documentation
The documentation set for NX-OS for the Cisco MDS 9000 Family includes the following documents.
To find a document online, access the following web site:
To find a document online, access the following web site:
The documentation set for Cisco Fabric Manager appears in the Cisco Fabric Manager Release Notes
for Release 4.2(5), which is available from the following website:
for Release 4.2(5), which is available from the following website: