Cisco Cisco MDS 9000 SAN-OS Software Release 1.3 Guía De Información
Rick Leonard, PMP®, Vendor Services Lab Manager
Sam Mercier, VSC Lab, Sr. Engineer
System z® Hardware Development
System z® Hardware Development
International Business Machines Corporation
International Business Machines Corporation
Page 2 of 3
Table 6) Supported distance extension
Feature
Supported Distance
IBM System Storage Metro Mirror (formerly PPRC) using Fibre Channel
Protocol (FCP)
Protocol (FCP)
Synchronous mirroring is supported to up to 300 km
z/OS Global Mirror (formerly XRC) environments using FICON channels
Asynchronous mirroring is supported to up to 300 km
Fibre Channel over IP (FCIP)
Note: See Table 8 for supported configurations.
Note: See Table 8 for supported configurations.
Up to 300 km
Optical 2, 4, and 10 Gb/sec InterSwitch Links (ISLs) extended through
qualified DWDM extension products
qualified DWDM extension products
Up to 300 km
Optical 2 Gb/sec ISLs extended through Cisco 2 Gb/sec CWDM optics
Up to 100 km
Optical 4 Gb/sec ISLs extended through Cisco 4 Gb/sec CWDM optics
Up to 40 km
Optical 10 Gb/sec ISLs extended through Cisco Extended Reach optics
Up to 40 km
DWDM optics installed in MDS series switches and directors may be used
for 2 Gb/sec links
for 2 Gb/sec links
Up to 300 km
DWDM optics installed in 9200/9500 series switches and directors may be
used for 10 Gb/sec links
used for 10 Gb/sec links
Up to 100 km
Note: 8 Gb/sec ISLs were not tested at extended distance through CWDM or DWDM due to no availability of extension equipment with an 8
Gb/sec interface – When equipment is available this will be tested.
Table 7) Supported Software
It is anticipated that the tested switches and directors will operate with supported versions of System z operating systems - z/OS, z/VM, z/VSE,
z/TPF, and Linux on System z that support FICON.
It is anticipated that the tested switches and directors will operate with supported versions of System z operating systems - z/VM, z/VSE, and
Linux on System z that support FCP.
System Automation for OS/390 (SA OS/390) is supported for in band management.
Table 8) Supported FCIP Configurations
9216i 9216i
Gb/sec interface – When equipment is available this will be tested.
Table 7) Supported Software
It is anticipated that the tested switches and directors will operate with supported versions of System z operating systems - z/OS, z/VM, z/VSE,
z/TPF, and Linux on System z that support FICON.
It is anticipated that the tested switches and directors will operate with supported versions of System z operating systems - z/VM, z/VSE, and
Linux on System z that support FCP.
System Automation for OS/390 (SA OS/390) is supported for in band management.
Table 8) Supported FCIP Configurations
9216i 9216i
9216i 14+2
14+2 14+2
9222i 9222i
9222i 18+4
18+4 18+4
Notes:
1.
FCIP distance support is for up to 300 km. Testing was performed with both emulated distance and with real fiber over DWDM.
2.
Performance characteristics can vary depending on environment. Professional assistance should be sought when implementing this technology.
3.
The 14+2 and the 18+4 port cards can be plugged into the MDS-9500 directors.
4.
Contact Cisco for further extending FCIP links through use of the FICON XRC Acceleration (XRCA) feature.
5.
Contact Cisco for further extending FCIP links through use of the FICON Tape Acceleration (FTA) for tape writes feature.