Cisco Cisco MDS 9000 NX-OS Software Release 6.2 Notas de publicación

The documentation set for the Cisco MDS 9000 Family includes the documents listed in this section. To find a document online, 
access the following URL:

The documentation set for Cisco Prime Data Center Network Manager is available from the following URL:

1K FLOGI limit not implemented on Cisco MDS 9250i.

FCNS EEM syslog on switchover without any change in FCNS DB size.

Only 1 port enabled in range of ports in “diag failure” after “no shut”.

Port-manager causes Supervisor failure during switchover.

Some data path diagnostic tests incorrectly pass on DS-X9448-768K9.

IOA VI/VTs can fill up FCID persistent DB and prevent new logins.

“pathtrace” does not display counters for FCIP and FCIP PC links.

“suspend” and “no suspend” operations should not be allowed to overlap.

Module reload or poweroff does not quiesce FC traffic on that module.

Add an “action” option to port-monitor for internal frame drops.

Port-Monitor delta threshold traps not sent after port goes down/flaps.

Max FCIP throughput is sub-linerate on MDS 9250i platform.

Slow port events need to be supported by port monitor.

Allow spanning local physical interfaces to supervisor for frame capture.

Normalize EEM zone system policy limit correction zones and zonemembers.

Radius/tacacs+ users unable to login after upgrading - 'access denied'

Link up over DWDM very slow  (DS-X9448-768K module)

Link up over DWDM very slow (DS-X9248-256K9 and DS-X9232-256K9 
modules)

CSCus46630

ISCSI max-bandwidth-mbps configurable is only 1 GIG for 10 Gig IPS port

NPV mode port-monitor fails to alert on F port after (T)NP port flap