Cisco Cisco IOS Software Release 12.2(11)YT Notas de publicación
5
Release Notes for Cisco 2600 Series Routers for Cisco IOS Release 12.2(11) YT2
OL-3286-01 Rev. B0
New and Changed Information
New and Changed Information
The following sections list the new hardware and software features supported by the Cisco 2600 series
routers for Cisco IOS Release 12.2(11) YT2.
routers for Cisco IOS Release 12.2(11) YT2.
New Hardware and Software Features in Cisco IOS Release 12.2(11)YT2
No new hardware or software features are supported in Cisco IOS Release 12.2(11)YT2.
New Hardware Features in Cisco IOS Release 12.2(11)YT1
There are no new hardware features supported by the Cisco 2600 series routers in
Cisco IOS Release 12.2(11)YT1.
Cisco IOS Release 12.2(11)YT1.
New Software Features in Cisco IOS Release 12.2(11)YT1
The following new software features are supported by the Cisco 2600 series routers for Cisco IOS
Release 12.2(11)YT1:
Release 12.2(11)YT1:
Cisco IOS Telephony Service V2.1 Updates
Cisco IOS Release 12.2(11)YT1 introduces improvements to phone rebooting commands and an updated
script for the H.450 transfer and forward application.
script for the H.450 transfer and forward application.
After you update information for a phone that is associated with a Cisco IOS Telephony Service (ITS)
router, the phone must be rebooted for the new information to take effect. In Cisco IOS
Release 12.2(11)YT1, the reset command has been modified to allow the sequential reboot of the ITS
phones. Using a sequential reboot minimizes the risk of conflict which can occur when multiple phones
attempt to access changed ITS configuration information through TFTP. In addition, the restart
command has been added to support quick phone rebooting for use when only the line and speed-dial
configuration for a phone is changed.
router, the phone must be rebooted for the new information to take effect. In Cisco IOS
Release 12.2(11)YT1, the reset command has been modified to allow the sequential reboot of the ITS
phones. Using a sequential reboot minimizes the risk of conflict which can occur when multiple phones
attempt to access changed ITS configuration information through TFTP. In addition, the restart
command has been added to support quick phone rebooting for use when only the line and speed-dial
configuration for a phone is changed.
The tool command language (TCL) script that controls H.450 applications has been updated in the
current release and is named app-h450-transfer.2.0.0.2.tcl. You can continue to use the previous script,
called app-h450-transfer.2.0.0.1.tcl, with Cisco IOS Release 12.2(11)YT1, but you cannot use the new
app-h450-transfer.2.0.0.2.tcl script with a release of Cisco IOS software that is earlier than Cisco IOS
Release 12.2(11)YT1.
current release and is named app-h450-transfer.2.0.0.2.tcl. You can continue to use the previous script,
called app-h450-transfer.2.0.0.1.tcl, with Cisco IOS Release 12.2(11)YT1, but you cannot use the new
app-h450-transfer.2.0.0.2.tcl script with a release of Cisco IOS software that is earlier than Cisco IOS
Release 12.2(11)YT1.
For more information, refer to Cisco IOS Telephony Service V2.1:New Features for Cisco IOS
Release 12.2(11)YT at the following URL:
Release 12.2(11)YT at the following URL:
New Hardware Features in Cisco IOS Release 12.2(11)YT
The following new hardware features are supported by the Cisco 2600 series routers for Cisco IOS
Release 12.2(11)YT:
Release 12.2(11)YT: