Cisco Cisco IOS Software Release 12.4(23) Notas de publicación

Descargar
Página de 610
510
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
  Resolved Caveats—Cisco IOS Release 12.4(8a)
Interfaces and Bridging
CSCek27833
Symptoms: Pings with a datagram size of 1485 and above are not going across the bridge.
Conditions: This symptom is observed on a serial interface configured for PPP and part of the bridge 
group on a Cisco router.
Workaround: Increase the MTU size on the interfaces. For example, configure an MTU of 1524. 
IP Routing Protocols
CSCed84633
Symptoms: The interface-type and interface-number arguments in the distribute-list address family 
configuration command do not function.
Conditions: This symptom is observed on a Cisco platform that integrates the fix for caveat 
CSCea59206. A list of the affected releases can be found at 
. Cisco IOS 
software releases that are not listed in the “First Fixed-in Version” field at this location are not 
affected.
Workaround: There is no workaround.
Further Problem Description: The fix for CSCed84633 re-enables the interface-type and 
interface-number arguments in the distribute-list address family configuration command for both 
VRF interfaces and non-VRF interfaces. 
CSCek29860
Symptoms: A Cisco router may experience a software-forced crash.
Conditions: This symptom is observed on a Cisco router that is configured for secure NAT (SNAT), 
NAT Stateful Failover, and HSRP.
Workaround: There is no workaround. 
CSCek42134
Symptoms: NAT Virtual Interface (NVI) per VPN routing/forwarding (VRF) is broken from inside 
to outside. The router shows CEF drops for the destination prefix existing for a route for this prefix 
on VRF table.
Conditions: This symptom has been observed on Cisco IOS Release 12.3(14)T6 and Interim 
Release 12.4(7.20)T.
Workaround: Configure static translation for the destination prefix to itself. 
CSCek43945
Symptoms: A memory leak may occur on a router that is configured for NAT and the router may 
eventually run out of memory.
Conditions: This symptom is observed on a Cisco router when NAT is configured.
Workaround: There is no workaround. 
CSCse04037
Symptoms: A ping or a Telnet connection from an inside gateway to an outside gateway through a 
router that is configured for NAT may fail because of an error in the NAT table lookup process.