Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
584
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
Resolved Caveats—Cisco IOS Release 12.4(7d)
Wide-Area Networking
•
CSCse81069
Symptoms: Unconfiguring the isdn service b_channel command is not taking effect. The command
is not removed from the running configuration.
is not removed from the running configuration.
Conditions: This symptom occurs when configuring the isdn service b_channel command to a state
other than the default value of 0 on the ISDN D channel.
other than the default value of 0 on the ISDN D channel.
Workaround: To remove the command, shut down the T1/E1 controller first and then unconfigure
the command under the D channel serial interface.
the command under the D channel serial interface.
•
CSCsf30493
Symptoms: When a T.37 onramp call is made, the following error message may be generated:
%CSM-3-NO_VDEV: No modems associated
Conditions: This symptom is observed on a Cisco AS5850 that runs Cisco IOS interim
Release 12.4(10.7). The symptom may not be platform-specific.
Release 12.4(10.7). The symptom may not be platform-specific.
Workaround: There is no workaround.
Resolved Caveats—Cisco IOS Release 12.4(7d)
Cisco IOS Release 12.4(7d) is a rebuild release for Cisco IOS Release 12.4(7). The caveats in this
section are resolved in Cisco IOS Release 12.4(7d) but may be open in previous Cisco IOS releases.
section are resolved in Cisco IOS Release 12.4(7d) but may be open in previous Cisco IOS releases.
Basic System Services
•
CSCir00074
Symptoms: A router crashes when the casnDisconnect object is set to “true” for a PPPoE session.
Conditions: This symptom is observed on a Cisco 10000 series when you attempt to terminate the
PPPoE session through SNMP by using the casnDisconnect object of the
CISCO-AAA-SESSION-MIB.
PPPoE session through SNMP by using the casnDisconnect object of the
CISCO-AAA-SESSION-MIB.
Workaround: There is no workaround.
•
CSCsf19139
Symptoms: %RADIUS-3-NOSERVERS messages are logged after a reload in Cisco IOS
Release 12.3(18). At this time, the RADIUS accounting tickets are not generated.
Release 12.3(18). At this time, the RADIUS accounting tickets are not generated.
Conditions: This symptom has been observed on a Cisco AS5300 gateway.
Workaround: Enter into configuration mode and change the order of the servers under the server
group.
group.
•
CSCsg03830
Symptoms: The tacacs-server directed-request command appears in the running configuration
when is should be disabled. When you disable the command by entering no tacacs-server
directed-request and reload the router, the command appears to be enabled once more.
when is should be disabled. When you disable the command by entering no tacacs-server
directed-request and reload the router, the command appears to be enabled once more.
Conditions: This symptom is observed on a Cisco router that runs a Cisco IOS software image that
integrates the fix for CSCsa45148, which disables the tacacs-server directed-request command by
default.
integrates the fix for CSCsa45148, which disables the tacacs-server directed-request command by
default.