Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
395
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
Resolved Caveats—Cisco IOS Release 12.4(12)
ISO CLNS
•
CSCek47888
Symptoms: When a Traffic Engineering (TE) tunnel is configured for IS-IS, a router may resignal
the LSPs after the IP routing process is restarted, causing the LSP IDs to be changed.
the LSPs after the IP routing process is restarted, causing the LSP IDs to be changed.
Conditions: This symptom is observed on a Cisco router that runs a Cisco ION software image and
that functions as a Designated Router (DR) in a LAN when you enter the process restart
iprouting.iosproc command.
that functions as a Designated Router (DR) in a LAN when you enter the process restart
iprouting.iosproc command.
Workaround: On the router on which the IP routing process is restarted, for each LAN interface on
which IS-IS is enabled, enter the isis priority number-value command, in which the number-value
argument is 0. Doing so prevents the router from functioning as the DR in the LAN.
which IS-IS is enabled, enter the isis priority number-value command, in which the number-value
argument is 0. Doing so prevents the router from functioning as the DR in the LAN.
•
CSCse85158
Symptoms: Locally advertised networks that are configured for the NSAP address- family under
BGP will not be readvertised once they have been cleared from the BGP table.
BGP will not be readvertised once they have been cleared from the BGP table.
Conditions: Once the clear bgp nsap unicast * command has been issued, the networks will no
longer appear in the output of the show bgp nsap unicast command.
longer appear in the output of the show bgp nsap unicast command.
Workaround: There is no workaround.
Miscellaneous
•
CSCef73349
On a Cisco 800 router running inter vrf forwarding between Ethernet0 and Ethernet2, the cef
adjacency table might be deleted for entries out of Ethernet0.
adjacency table might be deleted for entries out of Ethernet0.
Workaround: .no ip route-cache cef on both ethernet .arp timeout 10 .Static mac
•
CSCeg00531
Symptoms: A router crashes when you remove an ATM subinterface.
Conditions: This symptom is observed when the subinterface is configured with a LANE client that
is configured for Multiprotocol over ATM (MPOA).
is configured for Multiprotocol over ATM (MPOA).
Workaround: There is no workaround.
•
CSCeg42877
Symptoms: PPPoA sessions are not coming up in autovcs after entering the shutdown interface
configuration command followed by the no shutdown interface configuration command.
Tracebacks are reported.
configuration command followed by the no shutdown interface configuration command.
Tracebacks are reported.
Conditions: This problem is found only if the QoS parameters are configured via the Radius server.
Workaround: Configure the QoS parameters through the command line interface (CLI).
•
CSCeg86867
Symptoms: An AAA server does not authenticate.
Conditions: This symptom is observed on a Cisco platform that functions as an AAA server and that
runs Cisco IOS Release 12.3(13) when you dial up using Microsoft callback through an
asynchronous line. Dialup through an ISDN modem works fine.
runs Cisco IOS Release 12.3(13) when you dial up using Microsoft callback through an
asynchronous line. Dialup through an ISDN modem works fine.
Workaround: There is no workaround.