Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
790
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
Resolved Caveats—Cisco IOS Release 12.4(3f)
Workaround: There is no workaround.
•
CSCsb43767
Symptoms: RADIUS stop packets that are sent to a RADIUS server may contain an incorrect value
for the NAS-Port attribute (RADIUS IETF attribute 5). Information that is related to the
asynchronous interface is not included in the Cisco-NAS-port VSA.
for the NAS-Port attribute (RADIUS IETF attribute 5). Information that is related to the
asynchronous interface is not included in the Cisco-NAS-port VSA.
Conditions: This symptom is observed on when a Cisco router sends stop packets to a RADIUS
server via an asynchronous interface.
server via an asynchronous interface.
Workaround: There is no workaround.
Miscellaneous
•
CSCek34049
Symptoms: A Cisco AS5850 that is configured for RPR+ may be unable to process more than 1990
MGCP voice calls. With more than 1990 MGCP voice calls, any of the following symptoms may
occur:
MGCP voice calls. With more than 1990 MGCP voice calls, any of the following symptoms may
occur:
–
Many DSP may time-out.
–
Active calls may hang.
–
Spurious memory accesses and tracebacks may be generated.
–
Incoming calls may be dropped.
–
NextPort SPE ports may be stuck in the “a” state.
Conditions: These symptoms are observed on a Cisco AS5850 that runs Cisco IOS Release 12.4(3d)
or Release 12.4(7a).
or Release 12.4(7a).
Workaround: There is no workaround. A Cisco AS5850 that is used to its full capacity (4 CT3 worth
of MGCP calls) may not scale beyond 1990 calls. When the symptoms have occurred, reload the
Cisco AS5850.
of MGCP calls) may not scale beyond 1990 calls. When the symptoms have occurred, reload the
Cisco AS5850.
•
CSCek42816
Symptoms: A voice gateway reloads while bulk calls are being processed.
Conditions: The symptom is observed on a Cisco voice gateway that runs VXML applications that
stream voice when the voice gateway receives prompts from an HTTP server.
stream voice when the voice gateway receives prompts from an HTTP server.
Workaround: Enter the ivr prompt streamed none command on the voice gateway.
•
CSCsa70712
Symptoms: When you reload a CMM in one slot, the CMM in another slot reloads too, and the
console of the supervisor engine shows an “EarlRecoveryPatch Reset” error message for the CMM
that you intentionally reloaded.
console of the supervisor engine shows an “EarlRecoveryPatch Reset” error message for the CMM
that you intentionally reloaded.
Conditions: This symptom is observed on a Cisco Catalyst 6000 series and Cisco 7600 series when
you enter the reload command via the console of the CMM.
you enter the reload command via the console of the CMM.
Workaround: Do not reload the CMM via its console. Rather, enter the hw-module module slot
number reset command for the CMM on the supervisor engine.
number reset command for the CMM on the supervisor engine.
•
CSCsb23038
Symptoms: While attempting performance/stress testing, a memory leak is experienced. The
Terminating Gateway (TGW) could not be accessed through the console, the following message was
output:
Terminating Gateway (TGW) could not be accessed through the console, the following message was
output: