Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
809
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
Resolved Caveats—Cisco IOS Release 12.4(3c)
Conditions: This symptom is observed on a Cisco AS5850 that is running a special image of
Cisco IOS Release 12.3(11)T6 and occurs only when there are more than 900 H.323 voice calls.
Cisco IOS Release 12.3(11)T6 and occurs only when there are more than 900 H.323 voice calls.
Workaround: Do not enter the show voice call status command in a stress situation.
•
CSCsc31082
Symptoms: When performing the show policy-map interface MFR command, the counters do not
increment.
increment.
The counters in show policy-map interface MFR do not increment for any type/class of service.
Even the class-default shows 0 packets. The counters in show frame-relay pvc show the packets
correctly.
Even the class-default shows 0 packets. The counters in show frame-relay pvc show the packets
correctly.
Conditions: A map-class is configured under an MFR (FRF.16) bundle (sub- interface). This
map-class consists of both an input and output service-policy.
map-class consists of both an input and output service-policy.
Workaround: There is no workaround.
•
CSCsc39557
Symptoms: Spurrious memory access errors are encountered that may cause a bus error crash.
Conditions: This symptom is observed on a Cisco 2800 router that is utilizing voice and is running
Cisco IOS Release 12.4(3). This appears to be seen only when caller-id is enabled on FXS ports.
Cisco IOS Release 12.4(3). This appears to be seen only when caller-id is enabled on FXS ports.
Workaround: Disable caller-id on any FXS ports.
•
CSCsc51183
Symptoms: A Cisco AS5850 may restart because of a software forced crash preceded by the
following error:
following error:
%SYS-6-STACKLOW: Stack for process VTSP running low, 0/12000
Conditions: This symptom has been observed on Cisco IOS Release 12.3(11)T.
Workaround: There is no workaround.
•
CSCsc54584
Symptoms: A standard ingress ACL for transit traffic does not function on an interface that is
configured for MFR.
configured for MFR.
Conditions: This symptom is observed on a Cisco 7500 series that runs Cisco IOS
Release 12.3(11)T8 and that has an MFR bundle that is configured on a PA-MC-8TE1 port adapter.
The symptom may also occur in other releases.
Release 12.3(11)T8 and that has an MFR bundle that is configured on a PA-MC-8TE1 port adapter.
The symptom may also occur in other releases.
Workaround: There is no workaround.
•
CSCsc66658
Symptoms: Ping does not work if loopback is configured on the interface.
Conditions: This symptom has been observed when loopback is configured.
Workaround: There is no workaround.
Wide-Area Networking
•
CSCeg77994
Symptoms: A LAC does not send an Accounting-Start RADIUS record to a RADIUS server for a
user session.
user session.