Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
428
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
Resolved Caveats—Cisco IOS Release 12.4(10b)
Interfaces and Bridging
•
CSCsg64182
Symptoms: VIP may crash due to a bus error.
Conditions: This symptom occurs when a dot1q subinterface on the VIP is configured with a service
policy.
policy.
Workaround: Remove the service policy.
IP Routing Protocols
•
CSCsf27220
Symptoms: A Cisco 7500 series router with any ATM Port Adapter may crash.
Conditions: This symptom is observed when a router is configured with the Next Hop Resolution
Protocol (NHRP) feature. When sending traffic, the router will crash.
Protocol (NHRP) feature. When sending traffic, the router will crash.
Workaround: There is no workaround.
Miscellaneous
•
CSCed57504
Symptoms: A router reloads when a session using virtual-template configuration and terminated on
this router is being cleared from the DSL CPE router that is the peer router for the connection.
this router is being cleared from the DSL CPE router that is the peer router for the connection.
Conditions: This symptom occurs when a session using virtual-template configuration and
terminated on this router is being cleared from the DSL CPE router that is the peer router for the
connection.
terminated on this router is being cleared from the DSL CPE router that is the peer router for the
connection.
Workaround: There is no workaround.
•
CSCei39688
Symptoms: When a CEF initialization failure occurs, an ATM PVC that is configured for OAM may
not pass traffic even though the PVC link status is up:
not pass traffic even though the PVC link status is up:
Router#show ip interface brief | include ATM
ATM3/0/0 unassigned YES manual up up
ATM3/0/0.100 unassigned YES unset up up
ATM3/0/0.300 10.1.1.1 YES manual up up
ATM3/0/0.999 unassigned YES unset up up
Router#show cef interface brief | include ATM
ATM3/0/0 unassigned up dCEF
ATM3/0/0.100 unassigned down dCEF
ATM3/0/0.300 10.1.1.1 down dCEF
ATM3/0/0.999 unassigned down dCEF
Router#show ip cef | include 10.1.1.
10.1.1.0/30 attached ATM3/0/0.300