Cisco Cisco IOS Software Release 12.4(23) Notas de publicación

Descargar
Página de 610
949
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
  Resolved Caveats—Cisco IOS Release 12.4(1)
ISO CLNS
CSCeh00090
Symptoms: Routes may be unexpectedly removed from the routing table.
Conditions: This symptom is observed when IS-IS is used to advertise IP prefixes and when you 
enter a distance command that changes the overall configuration but keeps a subset of the prefixes 
at the same distance as in the previous configuration. The routes for which the distance does not 
change may be removed from the routing table.
The following two examples show configurations in which the symptom occurs. When the distance 
configuration for IS-IS is 115 ip and you enter one of the following command sequences, the 
symptom occurs:
router isis distance 255 ip distance 115 ip
or
router isis distance 115 0.0.0.0 255.255.255.255
Workaround: For all prefixes, configure distances that differ from the distances that were initially 
configured. 
CSCeh00680
Symptoms: A router that is configured for Multi-Topology IS-IS (M-ISIS) may reload.
Conditions: This symptom is observed on a Cisco router that runs Cisco IOS Release 12.0S or 
Release 12.2S.
Workaround: Disable M-ISIS. 
CSCsa45381
Symptoms: CLNS fast-switching is disabled on a serial E3 interface that is configured for HDLC 
encapsulation.
Conditions: This symptom is observed on a Cisco router that runs Cisco IOS Release 12.0(30)S but 
may also occur in other releases.
Workaround: There is no workaround. 
Miscellaneous
CSCdv07156
Symptoms: A router that is configured with thousands of RIP routes may crash when multiple links 
flap.
Conditions: This symptom is observed on a Cisco router that is configured for RIP.
Workaround: There is no workaround. 
CSCdx41392
Symptoms: Please see DDTS CSCdy66662.
The COPS-PR MIB is no longer part of the Cisco IOS code as of mid-May 2002. All subsequent 
images do not support this unsupported feature. If an issue is reported against the COPS-PR MIB 
code, it will not be fixed as this code is no longer supported.
Results of this caveat (i.e., a router crash during a mibwalk) can be found with either V1 or V2.