Cisco Cisco IOS Software Release 12.4(23) Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
448
Caveats for Cisco IOS Release 12.4
OL-7656-15 Rev. J0
Resolved Caveats—Cisco IOS Release 12.4(10)
Workaround: Increase the MTU size on the interfaces. For example, configure an MTU of 1524.
•
CSCin97786
Symptoms: An online insertion and removal (OIR) of a Versatile Interface Processor (VIP) that is
installed in a Cisco 7500 series may cause the Route Switch Processor (RSP) to stop responding.
installed in a Cisco 7500 series may cause the Route Switch Processor (RSP) to stop responding.
Conditions: This symptom is observed when two FDDI port adapters are installed in the VIP.
Workaround: There is no workaround.
•
CSCsc66187
Symptoms: Error messages such as the following one may be generated on a Cisco 7500 series or
Cisco 7600 series:
Cisco 7600 series:
%CWPA-3-IPCALLOCFAIL: Failed to allocate IPC buffer for loveletter data
Conditions: This symptom is observed on a Cisco 7500 series and Cisco 7600 series that are
configured with a 1-port Packet-over-SONNET OC-3c/STM-1 multimode port adapter
(PA-POS-OC3MM) when you enter the no shutdown interface configuration command on the
interface.
configured with a 1-port Packet-over-SONNET OC-3c/STM-1 multimode port adapter
(PA-POS-OC3MM) when you enter the no shutdown interface configuration command on the
interface.
Workaround: There is no workaround.
•
CSCse17103
Symptoms: A Bridge Group Virtual Interface (BVI) stops receiving CLNS packets.
Conditions: This symptom is observed when the packets arrive via a dot1q subinterface that belongs
to one bridge group and when another dot1q subinterface on the same physical interface belongs to
another bridge group.
to one bridge group and when another dot1q subinterface on the same physical interface belongs to
another bridge group.
Workaround: Enter the clns router isis area-tag command on the physical subinterface.
Alternate Workaround: Enter the clns enable command on the dot1q subinterface, although doing
so may cause problems with the connected end systems.
so may cause problems with the connected end systems.
•
CSCse61893
Symptoms: A ping from a channelized T3 (CT3) port adapter may fail.
Conditions: This symptom is observed on a Cisco platform that is configured with a CT3 port
adapter that functions in unchannelized mode.
adapter that functions in unchannelized mode.
Workaround: There is no workaround.
IP Routing Protocols
•
CSCed84633
Symptoms: The interface-type and interface-number arguments in the distribute-list address family
configuration command do not function.
configuration command do not function.
Conditions: This symptom is observed on a Cisco platform that integrates the fix for caveat
CSCea59206. A list of the affected releases can be found at
CSCea59206. A list of the affected releases can be found at
. Cisco IOS
software releases that are not listed in the “First Fixed-in Version” field at this location are not
affected.
affected.
Workaround: There is no workaround.
Further Problem Description: The fix for CSCed84633 re-enables the interface-type and
interface-number arguments in the distribute-list address family configuration command for both
VRF interfaces and non-VRF interfaces.
interface-number arguments in the distribute-list address family configuration command for both
VRF interfaces and non-VRF interfaces.