Cisco Cisco IOS Software Release 12.4(2)XB6 Referencia técnica
26
Command Reference for Cisco PDSN Release 4.0 in IOS Release 12.4(15)XR
cdma pdsn accounting prepaid
To enable the Prepaid billing feature on PDSN, use the cdma pdsn accounting prepaid command in
global configuration mode. To disable this feature, use the no form of the command.
global configuration mode. To disable this feature, use the no form of the command.
cdma pdsn accounting prepaid [volume | duration]
no cdma pdsn accounting prepaid [volume | duration]
Syntax Description
Defaults
There are no default values for this command.
Command Modes
Global configuration
Command History
Usage Guidelines
Prepaid quota metering on the PDSN can be configured as volume-based only by enabling the volume
keyword, or duration-based only by enabling the duration keyword. If no option is provided, both
volume-based and duration-based metering are enabled on the PDSN, but only one can be effective at a
time for one prepaid flow.
keyword, or duration-based only by enabling the duration keyword. If no option is provided, both
volume-based and duration-based metering are enabled on the PDSN, but only one can be effective at a
time for one prepaid flow.
Note
The Radius Disconnect feature should be enabled the on PDSN for Prepaid service. Use the cdma pdsn
radius disconnect command to enable the radius disconnect (POD) feature.
radius disconnect command to enable the radius disconnect (POD) feature.
Examples
The following example illustrates how to enable volume-based billing on the PDSN using the cdma
pdsn accounting prepaid command:
pdsn accounting prepaid command:
router# cdma pdsn accounting prepaid volume
Command
Description
volume
Specifies that quota metering on the PDSN will be
volume-based.
volume-based.
duration
Specifies that quota metering on the PDSN will be
duration-based.
duration-based.
Release
Modification
12.3(8)XW
This command was introduced.