Cisco Cisco IOS Software Release 12.4(22)XR Referencia técnica
14
Command Reference for Cisco PDSN Release 5.1 in IOS Release 12.4(22)XR1
OL-20781-01
cdma pdsn a10 ahdlc init-accm zero
cdma pdsn a10 ahdlc init-accm zero
When PPP negotiation starts, ACCM is always assumed to be 0x20 initially. With this, asynchronous
control character map (ACCM) is negotiated and used. To ensure that the ACCM is always assumed to
be zero, use the no form of the command in global configuration mode.
control character map (ACCM) is negotiated and used. To ensure that the ACCM is always assumed to
be zero, use the no form of the command in global configuration mode.
cdma pdsn a10 ahdlc init-accm zero
no cdma pdsn a10 ahdlc init-accm zero
Syntax Description
There are no keywords or variables for this command.
Defaults
No default values.
Command Modes
Global configuration
Command History
Usage Guidelines
If all the mobiles use only ACCM zero in deployment, use the CLI command no cdma pdsn a10 ahdlc
init-accm zero.
init-accm zero.
Examples
The following example shows how to enable the PDSN so that the packet fragmentation is done using
the PPP layer with ACCM is 0x20 initially:
the PPP layer with ACCM is 0x20 initially:
Router (config)# cdma pdsn a10 ahdlc init-accm zero
Release
Modification
12.4(22)XR1
This command was introduced.