Cisco Cisco IOS Software Release 12.4(22)YD Referencia técnica

To clear the mobility counters specific to each mobile station, use the clear ip mobile host-counters 
EXEC command.

clear ip mobile host-counters [[ip-address | nai string ] undo]]

EXEC

This command clears the counters that are displayed when you use the show ip mobile host command. 
The undo keyword restores the counters (this is useful for debugging). 

The following example shows how the counters can be used for debugging and displays the total number 
of bindings:

Router# show ip mobile host

Mobile Host List:

 

Total 1

cisco_user1@cisco.com:

    Dynamic address from local pool acct_pool1

    Static authorization using pool local acct_pool1

    Allowed lifetime 10:00:00 (36000/default)

    Roam status -Registered-, Home link on interface Null0

    Bindings

         1.1.1.56

    Accepted 0, Last time -never-

    Overall service time 01:14:58

    Denied 0, Last time -never-

    Last code '-never- (0)'

    Total violations 0

    Acct-Session-Id: 0x00000015

    Sent on tunnel to MN: 0 packets, 0 bytes

    Received on reverse tunnel from MN: 0 packets, 0 bytes

(Optional) IP address of a mobile node.

nai string

(Optional) Network access identifier of the mobile node.

(Optional) Restores the previously cleared counters.

12.0(1)T

This command was introduced.

12.2(2)XC

The nai keyword and associated variables were added.

12.4(15)XM

Added support to clear HA policing statistics.