Cisco Cisco IOS Software Release 12.2(33)SRE

The following is sample output from the show ip rsvp sender detail command at the MP during an FLR 
procedure:

Router# show ip rsvp sender detail

PATH:

   Destination 192.168.101.21, Protocol_Id 17, Don't Police , DstPort 1

   Sender address: 10.10.10.10, port: 1

   Path refreshes:

     arriving: from PHOP 172.16.37.35 on Et1/0 every 30000 msecs

Traffic params - Rate: 9K bits/sec, Max. burst: 9K bytes

     Min Policed Unit: 0 bytes, Max Pkt Size 2147483647 bytes

   Path ID handle: 09000406.

   Incoming policy: Accepted. Policy source(s): Default

   Status: Proxy-terminated

   Path FLR: Never repaired

   MP - Old Segments: 1

    Input on Serial2/0, phop 172.16.36.35

    Time before expiry: 9 refreshes

The following is sample output from the show ip rsvp sender detail command at the PLR after an FLR 
procedure:

Router# show ip rsvp sender detail

PATH:

   Destination 192.168.101.21, Protocol_Id 17, Don't Police , DstPort 1

   Sender address: 10.10.10.10, port: 1

   Path refreshes:

     arriving: from PHOP 172.16.31.34 on Et0/0 every 30000 msecs

   Traffic params - Rate: 9K bits/sec, Max. burst: 9K bytes

     Min Policed Unit: 0 bytes, Max Pkt Size 2147483647 bytes

   Path ID handle: 05000401.

   Incoming policy: Accepted. Policy source(s): Default

   Status:

   Output on Serial3/0. Policy status: Forwarding. Handle: 3B000406

     Policy source(s): Default

   Path FLR: Started 12:56:16 EST Thu Nov 16 2006, PSB repaired 532(ms) after.

           Resv/Perr: Received 992(ms) after.

The following sections provide references related to the RSVP FLR feature.

RSVP commands: complete command syntax, 
command mode, defaults, usage guidelines, and 
examples

, 

Release 12.2SR

QoS features including signaling, classification, and 
congestion management

Release 12.4