Cisco Cisco Security Manager 4.10 Notas de publicación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
9
Release Notes for Cisco Security Manager 4.10
Service Pack 1 Download and Installation Instructions
Service Pack 1 Download and Installation Instructions
To download and install Security Manager 4.10 service pack 1, follow these steps:
Note
You must install the Cisco Security Manager 4.10 FCS build on your server before you can apply this
service pack.
service pack.
Caution
Before installing this service pack, please back up the following files:
MDC\ips\etc\sensorupdate.properties
MDC\eventing\config\communication.properties
MDC\eventing\config\communication.properties
If you have previously modified these files, you will need to reconfigure them after installing the service
pack.
pack.
Step 1
Go to
, and then click Download Software for this Product under
the Support heading on the right side of the screen.
Step 2
Enter your user name and password to log in to Cisco.com.
Step 3
Click Security Manager 4.10 in the rightmost column.
Step 4
Click Security Manager (CSM) Software and then click 4.10sp1 under Latest.
Step 5
Download the file CSM4.10.0Service_Pack1.exe.
Step 6
To install the service pack, close all open applications, including the Cisco Security Manager Client.
Step 7
If Cisco Security Agent is installed on your server, manually stop the Cisco Security Agent service from
Start > Settings > Control Panel > Administrative Tools > Services.
Start > Settings > Control Panel > Administrative Tools > Services.
Step 8
Run the CSM4.10.0Service_Pack1.exe file that you previously downloaded.
Step 9
In the Install Cisco Security Manager 4.10 Service Pack 1 dialog box, click Next and then click Install
in the next screen.
in the next screen.
Step 10
After the updated files have been installed, click Finish to complete the installation.
Step 11
On each client machine that is used to connect to the Security Manager server, you must perform the
following steps to apply the service pack before you can connect to the server using that client:
following steps to apply the service pack before you can connect to the server using that client:
a.
If Cisco Security Agent is installed on the client, manually stop the Cisco Security Agent service
from Start > Settings > Control Panel > Administrative Tools > Services.
from Start > Settings > Control Panel > Administrative Tools > Services.
b.
Launch the Security Manager client.
You will be prompted to “Download Service Pack”.
c.
Download the service pack and then launch the downloaded file to apply the service pack.
Step 12
(Optional) Go to the client installation directory and clear the cache, for example, <Client Install
Directory>/cache.
Directory>/cache.
Step 13
(Optional) Configure SSL Certificates or self-signed certificates for Open SSL:
a.
Stop the CSM Daemon service [net stop crmdmgtd]