Cisco Cisco IOS XR Software Release 3.2 Notas de publicación
15
Release Notes for Cisco IOS XR Software Release 3.2.1
OL-8232-01
Changed Software Features in Cisco IOS XR Software Release 3.2.1
The following features were modified in Cisco IOS XR Software Release 3.2.1, and are supported on the
Cisco CRS-1 and Cisco XR 12000 Series Router platforms:
Cisco CRS-1 and Cisco XR 12000 Series Router platforms:
•
In Release 3.2.1, all Admin mode commands can be run only by entering into Admin mode, and not
by prefixing the command with the admin keyword in EXEC mode.
by prefixing the command with the admin keyword in EXEC mode.
The following example illustrates the correct usage of the admin command. In this example, the
user executes the show running command from Admin mode by enter the admin command in EXEC
mode, followed by the show running command in Admin mode:
user executes the show running command from Admin mode by enter the admin command in EXEC
mode, followed by the show running command in Admin mode:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# show running
The following example illustrates incorrect usage of the admin command. In this example, the user
executes the show running command from EXEC mode by prefixing the show running command
with admin keyword:
executes the show running command from EXEC mode by prefixing the show running command
with admin keyword:
RP/0/RP0/CPU0:router# admin show running
^
% Invalid input detected at '^' marker.
Important Notes
In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses,
including requirements applicable to the use of the products under telecommunications and other laws
and regulations; customers must comply with all such applicable laws in the countries in which they
intend to use the products.
including requirements applicable to the use of the products under telecommunications and other laws
and regulations; customers must comply with all such applicable laws in the countries in which they
intend to use the products.
When upgrading a Cisco XR 12000 Series Router from Cisco IOS to Cisco IOS XR software, follow the
upgrade instructions provided to minimize traffic impact. For detailed instructions, see the Upgrading
from Cisco IOS to Cisco IOS XR Software on the Cisco 12000 Series Router, Release 3.2 document for
procedures.
upgrade instructions provided to minimize traffic impact. For detailed instructions, see the Upgrading
from Cisco IOS to Cisco IOS XR Software on the Cisco 12000 Series Router, Release 3.2 document for
procedures.
Follow the instructions provided by Cisco for all card removal and replacement (fabric cards, LC, fan
controller and RP, and so on) to avoid impact to traffic. See the Cisco IOS XR Getting Started Guide for
procedures.
controller and RP, and so on) to avoid impact to traffic. See the Cisco IOS XR Getting Started Guide for
procedures.
If you intend to test beyond combined maximum configuration tested and published by Cisco, please
contact your Cisco representative to discuss how to engineer a large-scale configuration maximum for
your testing.
contact your Cisco representative to discuss how to engineer a large-scale configuration maximum for
your testing.