Cisco Cisco Firepower 4110 Security Appliance Notas de publicación

Cisco FXOS Release Notes, 2.0(1)

Verify that the unit is active:

Upgrading an Inter-chassis Cluster

Connect to the FXOS CLI on Chassis #2 (this should be a chassis that does not have the Primary unit). For 
instructions, see the “Accessing the FXOS CLI” topic in the Cisco FXOS CLI Configuration Guide or the Cisco 
FXOS Firepower Chassis Manager Configuration Guide (see 

Verify that all installed security modules are online:

Verify that all installed security modules have the correct FXOS version and ASA version installed:

scope server 1/x
show version
scope ssa
show logical-device

Verify that the cluster operational state is “In-Cluster” for all security modules installed in the chassis:

Verify that all installed security modules are shown as part of the cluster:

connect module x console
show cluster info

Verify that the Primary unit is not on this chassis:

There should not be any ASA instance with Cluster Role set to “Master”.

Download the FXOS 2.0.(1) image to your local machine (see 

).

Connect to the FXOS CLI on Chassis #2 (this should be a chassis that does not have the Primary unit). For 
instructions, see the “Accessing the FXOS CLI” topic in the Cisco FXOS CLI Configuration Guide or the Cisco 
FXOS Firepower Chassis Manager Configuration Guide (see 

Turn off all applications on Chassis #2:

Turn off the ASA application:

scope ssa
scope slot x (where x is the slot ID on which the ASA logical device is configured)
scope app-instance asa
disable
exit