Cisco Cisco Firepower 4120 Security Appliance Guía De Instalación
6
Cisco Firepower Threat Defense for Firepower 4100 Quick Start Guide
Interface information and addressing
End-user license agreement
Procedure
1.
From the Firepower Chassis Manager interface, choose Logical Devices to open the Logical Devices page.
2.
Click Add Device to open the Add Device dialog box.
3.
For the Device Name, provide a name for the logical device. This name is used by the Firepower 4100
supervisor to configure management settings and assign interfaces; it is not the device name used in the
security module configuration.
supervisor to configure management settings and assign interfaces; it is not the device name used in the
security module configuration.
4.
For the Template, choose Firepower Threat Defense.
5.
For the Image Version, choose the Firepower Threat Defense software version.
6.
For the Device Mode, click the Standalone radio button.
7.
Click OK. You see the Provisioning - device name window.
8.
Expand the Data Ports area, and click each interface that you want to assign to the Firepower Threat Defense.
9.
Click the device icon in the center of the screen. The configuration dialog box appears.
10.
Configure the deployment options for each tab of the configuration dialog box:
a.
Logical Device Information—Enter the management settings for this logical device.
Note:
Virtual IPv4 or IPv6 addresses can be configured from the Firepower Management Center after device
registration. This is important if you want to use syslog.
b.
Settings—Enter a registration key and password and IP address for the managing Firepower Management
Center; also choose the firewall mode, Firepower eventing interface (if configured), and DNS information.
Center; also choose the firewall mode, Firepower eventing interface (if configured), and DNS information.
Note:
The registration key is a user-generated one-time use key that must not exceed 37 characters. Valid
characters include alphanumerical characters (A–Z, a–z, 0–9) and the hyphen (-). You will need to remember
this registration key when you add the device to the Firepower Management Center.
this registration key when you add the device to the Firepower Management Center.
c.
Interface Information—Enter the management settings for this logical device.
Note:
A security module requires its own IP address, which the Firepower Management Center uses when
registering the device. This IP is mandatory to add the module to the Firepower Management Center.
d.
Agreement—Read and accept the end user license agreement (EULA).
11.
Click OK to close the configuration dialog box.
12.
Click Save. The Firepower 4100 supervisor deploys the logical device by downloading the specified software
version and pushing the bootstrap configuration and management interface settings to the security module.
version and pushing the bootstrap configuration and management interface settings to the security module.
3. Register with the Firepower Management Center
Before You Begin
For the Firepower Threat Defense security module that you plan to register, verify the settings from the
Firepower Chassis Manager.
Firepower Chassis Manager.
Firepower Threat Defense running on the Firepower 4100 requires Smart Software Licensing, configurable
from the Firepower Management Center.
from the Firepower Management Center.