Cisco Cisco Firepower 4120 Security Appliance Guía De Instalación
9
Cisco Firepower Threat Defense for Firepower 4100 Quick Start Guide
Delete Existing Logical Devices and Application Configurations
To upgrade a Firepower Threat Defense logical device or to deploy a different logical device, you must delete the
existing device and then create a new one using the updated image. If you are upgrading both the FXOS platform
bundle image and an application, you must upgrade the FXOS platform bundle first.
existing device and then create a new one using the updated image. If you are upgrading both the FXOS platform
bundle image and an application, you must upgrade the FXOS platform bundle first.
Procedure
1.
From the Firepower Chassis Manager interface, choose Logical Devices to open the Logical Devices page.
The Logical Devices page shows a list of configured logical devices on the chassis. If no logical devices have
been configured, a message stating so is shown instead.
been configured, a message stating so is shown instead.
2.
Click the Delete icon associated with each logical device.
3.
Click Yes when prompted to delete the logical device.
4.
Click Yes when prompted to delete the application configuration. This final step is necessary for a successful
installation of Firepower Threat Defense.
installation of Firepower Threat Defense.
What To Do Next
Check the running version of the Firepower FXOS software running on the chassis to determine if it needs to
be upgraded to support running Firepower Threat Defense or any other application on the security engine.
be upgraded to support running Firepower Threat Defense or any other application on the security engine.
Upgrade the Firepower Supervisor Platform
The running version of FXOS is displayed at the top of the Overview page on the Firepower Chassis Manager web
interface. You need to determine if the current version of the FXOS running on the chassis is sufficient to support
running your application on the security engine. You upgrade the FXOS platform bundle from the Updates page of
the System menu.
interface. You need to determine if the current version of the FXOS running on the chassis is sufficient to support
running your application on the security engine. You upgrade the FXOS platform bundle from the Updates page of
the System menu.
Procedure
1.
From the Firepower Chassis Manager interface, choose System > Updates. The Available Updates page
shows a list of the Firepower 4100 platform bundle images and application images that are available on the
chassis.
shows a list of the Firepower 4100 platform bundle images and application images that are available on the
chassis.
2.
Browse the Image Name column to locate the FXOS platform bundle you need to load.
3.
Click the upload/download icon associated with the FXOS platform bundle you need to load.
4.
Click Yes on the Update Bundle Image dialog for the selected version. When you click yes, the selected
version will be installed and the device will reboot.
version will be installed and the device will reboot.
6. Access the Firepower Threat Defense CLI
For initial configuration or for troubleshooting, you can access the Firepower Threat Defense CLI from the
Firepower 4100 FXOS supervisor CLI.
Firepower 4100 FXOS supervisor CLI.
Procedure
1.
Connect to the supervisor CLI, either from the console port or using SSH, for example.
2.
Connect to one of the security modules.
connect module
slot console
Example: