Cisco Cisco IPS 4255 Sensor Notas de publicación
17
Release Notes for Cisco Intrusion Prevention System 7.0(9)E4
OL-26888-01
After Upgrading to Cisco IPS 7.0(9)E4
•
For the procedure for reimaging sensors, refer to
.
•
For the procedure for configuring automatic updates, for the CLI refer to
for the IDM refer to
the IME refer to
.
•
For the procedure for disabling global correlation, for the CLI refer to
, for the IDM refer to
.
•
For the procedure for omitting global correlation from the overall sensor health status, for the CLI
refer to
refer to
for the IME refer to
.
CSM Update Instructions
Note
CSM support for IPS 7.0(9) will be introduced in CSM 4.4 SP2, which will be released shortly
To apply the 7.0(9)E4 service pack to sensors using CSM 4.4 SP2, follow these steps:
Step 1
Download the service pack ZIP file, IPS-CSM-K9-7.0-9-E4.zip, to the
<CSM-install-dir>/MDC/ips/updates directory.
<CSM-install-dir>/MDC/ips/updates directory.
Step 2
Launch the IPS Update Wizard from Tools > Apply IPS Update.
Step 3
Select Sensor Updates from the drop-down menu, and select the IPS-CSM-K9-7.0-9-E4.zip file.
Step 4
Click Next.
Step 5
Select the device(s) to which you want to apply the service pack, then click Finish.
Step 6
Create a deployment job and deploy to sensors using Deployment Manager. Deployment Manager can
be launched from Tools > Deployment Manager.
be launched from Tools > Deployment Manager.
Step 7
Click Deploy in the popup and follow instructions.
After Upgrading to Cisco IPS 7.0(9)E4
This section provides information about what to do after you install IPS 7.0(9)E4. It contains the
following topics:
following topics:
•
•
•
•