HP 603251-B21 Manual De Usuario

HP BladeSystem c-Class Interconnect and Mezzanine Components:

http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html

The HP ProLiant BL460c G7 provides greater 2P x86 server blade density without compromise and maximum power-efficiency with
flexibility and choice.

HP ProLiant BL460c G7 server blade includes:

Processor

Processor:

Up to two (2) Intel® Xeon® 5500 or 5600 series processors
Intel® 5520 Chipset

Memory

Memory:

Twelve (12) DIMM slots
Up to 384GB, using PC3-10600 DDR3 registered (RDIMM) memory, operating at 800MHz when fully populated at 2
DIMMs per channel in 12 slots
Up to 48GB, using PC3-10600 DDR3 unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at 2
DIMMs per channel in 12 slots

Storage Controller

Storage Controller:

HP Smart Array P410i Controller with no cache supporting RAID 0 and 1

Internal Drive Support

Internal Drive Support:

Two (2) hot-plug small form factor (SFF) drive bays
Support for SAS, SATA, and SSD hot-plug hard drives

Network Controller

Network Controller:

Integrated NC553i Dual Port FlexFabric 10Gb Adapter supporting autosensing 10Gb/1Gb Ethernet, FCoE, Flex-10,
TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.

NOTE:

NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-
port Module or HP 10GbE Pass-Thru Module. Learn more at:

www.hp.com/go/virtualconnect

NOTE:

NOTE: Each port is autosensing 1 Gb/10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect
components. Both ports will operate at the same speed.

One (1) additional 10/100 server adapter dedicated to iLO 3 Management

Mezzanine Support

Mezzanine Support:

Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards

Dual-port FlexFabric adapter mezzanine options
Dual-port Fibre Channel mezzanine (4 Gb or 8 Gb) options for SAN connectivity
Multi-port 1Gb and 10Gb Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) mezzanine options for low latency and high bandwidth server interconnectivity
I/O accelerator mezzanine options for high transaction rate local storage
Smart Array SAS RAID controller mezzanine options for external direct attach and shared SAS storage

Expansion Blade Support

Expansion Blade Support:

Supports one (1) optional storage, tape, or PCI expansion blade

Internal Media Support

Internal Media Support:

One (1) internal USB 2.0 connector for USB flash media drive keys
One (1) internal secure digital (SD) card slot

Trusted Platform Module

Trusted Platform Module:

One (1) internal TPM 1.2 module connector

Form Factor

Form Factor:

HP ProLiant BL460c G7 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures

Infrastructure Management

Infrastructure Management:

This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades

QuickSpecs

HP ProLiant BL460c Generation 7 (G7) Server Blade

Overview

DA - 13706 North America — Version 21 — November 18, 2011

Page 2