Cisco Cisco ASA 5510 Adaptive Security Appliance Prospecto
3-57
Cisco ASA Series 명령 참조, S 명령
3장 show as-path-access-list through show auto-update 명령
show asp drop
----------------------------------------------------------------
Name: nat-cluster-input
NAT invalid input:
An input value for clustering communication contains an unexpected or invalid value.
Recommendation:
This could be an internal software error. Contact Cisco Systems.
Syslogs:
None.
----------------------------------------------------------------
Name: nat-no-xlate-to-pat-pool
NAT no xlate to pat pool:
No pre-existing xlate found for a connection with a destination matching a mapped
address in a PAT pool.
Recommendation:
Configure static PAT is access is desired.
Syslogs:
None.
----------------------------------------------------------------
Name: nat--xlate-create-failed
NAT xlate creation failed:
Creation of a PAT xlate failed.
Recommendation:
Check system memory. Configure at least one backup PAT address. Configure a NAT
address to translate non-overload IP address. Only TCP, UDP, ICMP echo, and PPTP GRE
overloadable.
Syslogs:
None.
----------------------------------------------------------------
Name: cluster-peer-mcast-ignored
Flow matched a cluster peer mcast data traffic classify rule:
A multicast data packet was received on a L3 cluster interface when it is from a
cluster peer unit corresponding interface. This is a packet flooded back from L3 subnet.
Recommendation:
This counter is informational and the behavior expected. The packet has been forwarded
out of the cluster and should be ignored by cluster.
Syslogs:
None.
----------------------------------------------------------------
Name: cluster-dispatch-queue-fail
Cluster failed to enqueue into global dispatch work queue:
A forwarded data packet failed to enqueue into global dispatch work queue.
Recommendation:
This could be an internal software error. Contact Cisco Systems.
Syslogs:
None.
----------------------------------------------------------------
Name: cluster-dir-flow-create-fail
Cluster director failed to create director flow:
Director is trying to create a stub flow but failed due to resource limitation.
The resource limit may be either:
1) system memory
2) packet block extension memory
3) system connection limit