Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point Guía De Diseño

Descargar
Página de 216
114
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.0
OL-21848-01
  Connecting the Cisco 1520 Series Mesh Access Point to Your Network
To see if VLAN transparent mode is enabled or disabled, enter the following command:
Workgroup Bridge Interoperability with Mesh Infrastructure
A workgroup bridge (WGB) is a small stand-alone unit that can provide a wireless infrastructure 
connection for Ethernet-enabled devices. Devices that do not have a wireless client adapter to connect 
to the wireless network can be connected to the WGB through the Ethernet port. The WGB is associated 
with the root AP through the wireless interface. Thus, wired clients get access to the wireless network.
A WGB is used to connect wired networks over a single wireless segment. This is accomplished by 
informing the mesh access point of all the clients that the WGB has on its wired segment via IAPP 
messages. The data packets for WGB clients contain an additional MAC address in the 802.11 header (4 
MAC header, versus the normal 3 MAC data headers). The additional MAC in the header is the address 
of the WGB itself. This additional MAC address is used to route the packet to and from the clients.
WGB association is supported on all radios of every mesh access point (see 
).