Cisco Cisco Aironet 1530i Outdoor Access Point Guía De Instalación

Log in to the universal AP, using admin credentials. The default factory shipped User name is 
‘Cisco’ and Password is ‘Cisco’, and are case sensitive.

Upon successfully logging into the universal AP via Cisco AirProvision, the AP's status LED 
blinks Green or Teal (depending on your AP series) for 15 seconds. For more information on 
the LED states, see 

You are recommended to change the default factory shipped admin credentials after 
priming. Admin credentials for autonomous mode APs is Level 15 privilege user 
credentials, as configured on the AP. Admin credentials for lightweight APs is the AP 
user credentials as configured on the Wireless LAN Controller.

Depending on the configuration of the AP, the following scenarios are possible:

Correctly configured AP- 

If the AP is already configured correctly based on the location of the smartphone, the 
Configure and Audit buttons will be disabled, the following details are displayed along 
with the message 'Universal AP is configured correctly': 

AP Name

MAC Address

PID

Universal AP's product 
identification number

AP Primed

Shows ‘Yes’. 

Shows that the AP has been 
configured to a country and 
regulatory domain.

2.4 GHz Reg Domain

Regulatory Domain used for 
configuring the 2.4 GHz radio

5 GHz Reg Domain

Regulatory Domain used for 
configuring the 5 GHz radio

Configured Country

Country based on which the 
regulatory domain is configured