Cisco Cisco Firepower Management Center 4000 Notas de publicación

Version 5.2.0.3

Sourcefire 3D System Release Notes

31

Known Issues

In some cases, the system restore boot option does not output to the serial 

port on managed devices even if you selected Physical Serial Port as the 

remote console access option. (130772)

In several places, the documentation incorrectly indicates that you can add 

IP address ranges to network objects. The Sourcefire 3D System currently 

supports adding individual IP addresses or address blocks to network 

objects, not ranges. (130821, 130992)

In some cases, 3D8250, 3D8260, 3D8270, and 3D8290 managed devices 

with 10G or 40G NMSB may experience compatibility issues with 10G 

NFTW NetMods. To be compatible with 10G NFTW Netmods, 10G NMSB 

must be revision 7 or later and 40G NMSB must be revision 8 or later. 

(131189)

In rare cases, the table view of servers (Analysis > Hosts > Servers) may 

duplicate servers and produce inaccurate server counts. (131329)

The eStreamer client omits file policy UUID metadata from type 502 

intrusion events. (131362)

In some cases, NAT rule validation fails if you configure a static NAT rule 

with an original destination network that matches the translated source 

network on a dynamic NAT rule in the same policy. (131490)

If you schedule multiple simultaneous reporting tasks when using remote 

storage, the system may fail to send all reports to the selected remote 

storage location. As a workaround, schedule report generation tasks in 

30-minute intervals. (131805)

Sourcefire documentation does not reflect that you must disable Spanning 

Tree Protocol (STP) on any third-party switching equipment connected to a 

device’s management interface before connecting to a Series 3 appliance 

using LOM/SOL. (132488)

Known Issues Discovered in Previous Releases

The following is a list of known issues that were discovered in previous releases 

of the Sourcefire 3D System:

You must use the Defense Center’s web interface to unregister a managed 

device. If you unregister a device using either the device’s web interface or 

its command line interface (CLI), it is not removed from the Defense Center. 

(112659)

The system will generate a health alert if the Defense Center is unable to 

connect to the Sourcefire cloud. To troubleshoot, ensure the connection 

from the Defense Center to the Sourcefire cloud (

54.243.248.19 

and

 

54.243.248.162

) on port 32137 is working properly. (112708)

If multiple files are attached to a single email, the system may incorrectly 

identify files after the first. (114523)

If you attempt to create multiple static NAT rules with the same original 

values, the system may experience issues with traffic mapping. (116148)