Cisco Cisco Industrial Wireless 3702 Access Point Guía De Instalación
Statement 1022—Disconnect Device
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Warning
Statement 1024—Ground Conductor
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if
you are uncertain that suitable grounding is available.
a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if
you are uncertain that suitable grounding is available.
Warning
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1040—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1044—Port Connections
For connections outside the building where the equipment is installed, the following ports must be connected
through an approved network termination unit with integral circuit protection. 10/100/1000 Ethernet
through an approved network termination unit with integral circuit protection. 10/100/1000 Ethernet
Warning
Statement 1047—Overheating Prevention
To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of : 158°F (70°C)
ambient temperature of : 158°F (70°C)
Warning
Regulatory Compliance and Safety Information—Cisco IW3702 Access Point
5
Regulatory Compliance and Safety Information—Cisco IW3702 Access Point