Cisco Cisco 2504 Wireless Controller Guía Para Resolver Problemas
NTP on Wireless LAN Controllers Configuration
Example
Example
Document ID: 113334
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Managing System Date and Time on the Wireless LAN Controller
Configure
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Conventions
Managing System Date and Time on the Wireless LAN Controller
Configure
Verify
Troubleshoot
Related Information
Introduction
This document explains how to configure wireless LAN controllers (WLCs) for synchronizing the date and
time with a Network Time Protocol (NTP) server.
time with a Network Time Protocol (NTP) server.
Prerequisites
Requirements
Ensure that you meet these requirements before you attempt this configuration:
Basic knowledge of the configuration of lightweight access points (LAPs) and Cisco WLCs
•
Basic knowledge of NTP
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco 4400 WLC that runs software version 7.0.116.0
•
Cisco 1230AG Series LAPs
•
Cisco 2800 Series Router that runs Cisco IOS® Software release 12.4(11)T
•
The information in this document is based on these software and hardware versions:
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.