Cisco Cisco Industrial Wireless 3702 Access Point Guía De Instalación

Step 3

Screw the M8 nut onto the pole clamp bracket support bolt, and tighten just enough to prevent the bolt from falling off.

Step 4

To mount your access point on a vertical pole, you need to install two metal bands around the pole to support the access
point. This process requires extra tools and material not provided in the pole mount kit (see the following table for details).

Table 3: Material Needed to Mount Access Point on a Pole

In Kit

Materials Required

Mounting Method

Yes

• Two 0.75-in (1.9 cm) stainless steel

bands

• Banding strap tool (BAND IT)

(Cisco AIR-BAND-INST-TL=)

• Ground lug (provided with access

point)

• Crimping tool for ground lug,

Panduit CT-720 with CD-720-1 die
(http://onlinecatalog.panduit.com)

• #6 AWG ground wire

Vertical pole

Step 5

Select a mounting location on the pole to mount the access point. You can attach the access point to any pole from 2 to
16 inch (5.1 to 40.6 cm) in diameter.

Step 6

For poles larger than 3.5 inch (8.9 cm), mount the pole clamp bracket assembly to a pole (see the following image) using
two metal straps. Following the instructions provided with the banding strap tool (BAND IT) (AIR-BAND-INST-TL=),
loop each metal strap twice through the slots on the strap bracket.