Cisco Cisco 2504 Wireless Controller Guía Para Resolver Problemas
network from communicating with one another. By default, it is disabled for new WLANs, but if
enabled, it can cause issues for services like AirPlay when the AppleTV is on the wireless
network. Any Bonjour service that relies on communication between wireless clients can be
broken by peer-to-peer blocking.
enabled, it can cause issues for services like AirPlay when the AppleTV is on the wireless
network. Any Bonjour service that relies on communication between wireless clients can be
broken by peer-to-peer blocking.
Under the WLANs tab > Advanced section of the WLAN configuration, make sure P2P Blocking
Action is set to Disabled.
Action is set to Disabled.
Block Bonjour
In some cases, it is desirable to filter out Bonjour in order to prevent discovery between two nodes
while still enabling other multicast applications.
while still enabling other multicast applications.
Complete these steps:
Create ACLs on the wireless LAN controller in order to filter out IPv6 Bonjour
traffic.
traffic.
1.
(Version 7.2 and above only) - Create ACLs on the wireless LAN controller in order to filter
out IPv6 Bonjour
traffic.
out IPv6 Bonjour
traffic.
Note: The Bonjour ACL will only filter inbound multicast traffic from wireless clients to the
wired network. The ACL does not filter multicast packets coming into the controller.
wired network. The ACL does not filter multicast packets coming into the controller.
2.