Cisco Cisco Aironet 1400 Wireless Bridge Notas de publicación

CSCeb08817—The root bridge cannot ping a non-root bridge after reassociation.

Workaround: Use the CLI clear arp-cache command to clear the root bridge ARP cache. 

CSCeb10911—Linktest reports higher RSSI readings for the remote site.

There is no workaround for this problem.

CSCeb12740—The virtual ratio connection cannot come up after the station role is changed.

After you change the station role of two bridges while the link is active, the radios get associated 
but the virtual radio interfaces do not come up.

Workaround: After changing the station roles, you must restart both root and non-root bridges using the 
browser interface (System Software > System Configuration > Restart) or the CLI reload command.

CSCeb14603—Telnet session locks up under heavy traffic.

There is no workaround for this problem.

CSCeb15923—Radio firmware recovery does not work reliably.

There is no workaround for this problem.

CSCeb17296—Clear dot client command does not work with traffic passed.

When traffic is being passed through the bridges at around 30 to 40 percent CPU utilization, the CLI 
clear dot client H.H.H command does not clear the counters on the non-root bridge even though 
the association did clear.

There is no workaround for this problem.

CSCea77473—HTTP software upgrade with Netscape version 7.x intermittently fails.

When upgrading software with Netscape version 7.x, the Web interface cascades through all open 
Netscape windows. The upgrade intermittently fails or the browser states that the upgrade failed when in 
fact the upgrade actually worked.

Workaround: Use Netscape version 4.7 or another browser.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, select Wireless from 

the menu on the left, and click Wireless LAN.

The Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions provides detailed instructions for 
installing and mounting the bridge.

The separation distance between the two stacked bridge antennas is a minimum of 6.56 feet (2 meters).