Cisco Cisco Aironet 1400 Wireless Bridge Notas de publicación

CSCeb05835— The web interface no longer shows incorrect STP Root information on a bridge 
setup with multiple VLANs.

CSCeb12740—The virtual radio connection can now be made after the station role is changed.

CSCeb15923—Radio firmware recovery now works reliably.

CSCeb17296—The clear dot client command now works with traffic being passed.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, select Wireless from 

the menu on the left, and click Wireless LAN.

The Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions provides detailed instructions for 
installing and mounting the bridge.

The separation distance between the two stacked bridge antennas is a minimum of 6.56 ft (2 m).

If your bridge is configured at the factory for use in a regulatory domain other than North America or 
Korea, the transmit power options for the power local command differ from the power options listed in 
the Cisco Aironet 1400 Series Bridge Software Configuration Guide and in the Cisco IOS Command 
Reference for Cisco Aironet Access Points and Bridges. The transmit power options for low-power 
bridges are 16, 13, 12, 10, 9, 8, 7, and 4 dBm. Note that the maximum transmit power for your bridge 
depends on your regulatory domain.

The bridge protocol ieee command, which enables Spanning Tree Protocol (STP) on the bridge, now 
contains a suspend option. This option suspends STP on the bridge until you re-enable it.