Cisco Cisco 2504 Wireless Controller Guía Para Resolver Problemas
are no access points to the controller. If you plug in an access point that starts to broadcast the CiscoAirprovision SSID, the
wired GUI wizard is no longer accessible and the easy GUI setup configuration can be completed only through a wireless
client that is connected on the SSID. Therefore, it is either wired or wireless, but this GUI wizard does not work on both
simultaneously.
wired GUI wizard is no longer accessible and the easy GUI setup configuration can be completed only through a wireless
client that is connected on the SSID. Therefore, it is either wired or wireless, but this GUI wizard does not work on both
simultaneously.
High Availability
In Release 7.5 software code and later, the 2500 can be purchased as HA-SKU. This means that
the 2504 can then act as N+1 WLC. It still does not support AP SSO.
the 2504 can then act as N+1 WLC. It still does not support AP SSO.
The HA SKU WLC does not require a license and stands there in case any other WLC of its
mobility group fails. It can then support a maximum AP count license for 90 days, which starts
when the original WLC failed and when APS started to join the HA-SKU. There is no configuration
replication in N+1 redudancy. Check the High Availability deployment guide for more information
on HA.
mobility group fails. It can then support a maximum AP count license for 90 days, which starts
when the original WLC failed and when APS started to join the HA-SKU. There is no configuration
replication in N+1 redudancy. Check the High Availability deployment guide for more information
on HA.
It is also possible to turn a non-HA SKU WLC into an HA SKU when you enable the HA SKU
secondary unit :
secondary unit :