Cisco Cisco 2504 Wireless Controller Referencia técnica
18
Cisco Wireless LAN Controller IPv6 Deployment Guide, CUWN Release 8.0
D r a f t L a b e l — C i s c o C o n f i d e n t i a l
Phase 1—Client IPv6 Support in WLC Release 7.2 to 7.6
2.
In the left pane, click IPv6 > Neighbor Binding.
3.
Adjust the Down Lifetime, Reachable Lifetime, and Stale Lifetime as required. The default values should be sufficient
for most deployments.
for most deployments.
Each lifetime timer refers to the state that an IPv6 address can be in:
Down Lifetime – The down timer specifies how long IPv6 cache entries should be kept if the interface goes down.
Reachable Lifetime – This timer specifies how long an IPv6 address will be marked active, which means traffic has
been received from this address recently.
been received from this address recently.
Stale Lifetime – This timer specifies how long to keep IPv6 addresses in the cache which have not been seen within
the “Reachable Lifetime”.
the “Reachable Lifetime”.
Configuring IPv6 VideoStream
Complete these steps:
1.
Ensure Global VideoStream features are enabled on the controller.
Refer to
for information on enabling
VideoStream on the 802.11a/g/n network as well as the WLAN SSID.
2.
Go to the Wireless tab on the controller.
3.
In the left pane, click Media Stream > Streams.
4.
Click Add New to create a new stream.