Cisco Cisco 2504 Wireless Controller Referencia técnica
21
D r a f t L a b e l — C i s c o C o n f i d e n t i a l
Cisco Wireless LAN Controller IPv6 Deployment Guide, CUWN Release 8.0
Phase 2—Infrastructure IPv6 Support in WLC Release 8.0 and Later
1.
To configure the IPv6 address for WLC, from the WLC’s main menu, go to Controller > Interfaces > Management.
a.
In the Interface Address area, enter the Primary IPv6 Address in the 2001:XX:XX:X0::XX format. Enter the Prefix
Length as 64. In Primary IPv6 Gateway text box, assign the Link-Local address of the VLAN X0.
Length as 64. In Primary IPv6 Gateway text box, assign the Link-Local address of the VLAN X0.
b.
Login/telnet to the default gateway and run the command:
show ipv6 int brief
or
show ipv6 int vlanX0
.
c.
Now, copy/paste the specific link-local address to the WLC Primary IPv6 Gateway.
The following screenshot displays an example of the link local address for VLAN10 on a sample Core-Switch.
When you copy/paste the Link Local IPv6 address in the Primary IPv6 Gateway text box, ensure that there is no
space in the beginning and end of the Link local IPv6 address. Click Apply to save the settings.
space in the beginning and end of the Link local IPv6 address. Click Apply to save the settings.