Cisco Cisco 2504 Wireless Controller Guía Para Resolver Problemas
NCS Home Page
NCS 1.1 provides the ability to monitor IPv6 clients. A new home page dashlet, Client Count by IP Address
Type, provides a visual indicator of clients based on IP address type.
Type, provides a visual indicator of clients based on IP address type.
Not detected
refers to clients whose
IP address cannot be determined; typically wired clients in cases where IPv6 snooping is not
available/supported on the device.
available/supported on the device.
Browser Support
NCS 1.1 supports these browsers:
Firefox 3.6 and later
•
Google Chrome 12.0.742.x
•
Microsoft Internet Explorer with Chrome plug−in
Note: Native Internet Explorer is not supported.
•
This document provides architectural understanding and design guidance for NCS deployments.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco Prime NCS 1.1.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.