Cisco Cisco 2504 Wireless Controller Datos agregados
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 7
Feature
Description
Benefit
Proxy Mobile Internet Protocol (PMIPv6)
Mobile Access Gateway (MAG)
functionality on wireless controller
Mobile Access Gateway (MAG)
functionality on wireless controller
Provides a standardized mechanism for a
network-based mobility solution (transparent to
client devices) by enabling intersystem
handovers between mobile packet core
(3GPP) and Wi-Fi.
network-based mobility solution (transparent to
client devices) by enabling intersystem
handovers between mobile packet core
(3GPP) and Wi-Fi.
Seamless mobility between mobile data networks
and Wi-Fi in service provider deployments.
and Wi-Fi in service provider deployments.
Enhancements to access point groups and
RF profiles
RF profiles
A new “out-of-box” access point group that
disables radios, preventing the new access
points from causing any disruption in an
already converged network.
disables radios, preventing the new access
points from causing any disruption in an
already converged network.
RF profiles enhancements for high-density RF
environments such as auditoriums and
stadiums.
environments such as auditoriums and
stadiums.
Out of box access point group allows addition of
new access points without causing the network
fluctuation due to co-channel interference in an
existing network.
new access points without causing the network
fluctuation due to co-channel interference in an
existing network.
Additional RF profile configurations are enabled to
better control the effects of interference in dense
RF environments and minimize coverage holes.
better control the effects of interference in dense
RF environments and minimize coverage holes.
Direct-connect access points on the 2500
Series controller
Series controller
Local mode access points directly connected
to 2500 Series are now supported.
to 2500 Series are now supported.
Flexibility to connect access points directly to a
2500 Series controller for smaller deployments
2500 Series controller for smaller deployments
Wi-Fi Certified Passpoint (HS2.0)
certification for Release 7.3
certification for Release 7.3
Network and client devices implementing Wi-Fi
Alliance specifications for Hotspot 2.0 can
receive the Passpoint certification from the Wi-
Fi Alliance. Cisco Wireless products (Wireless
Controllers and Access points) using Release
7.3 will be submitted for Passpoint certification.
Alliance specifications for Hotspot 2.0 can
receive the Passpoint certification from the Wi-
Fi Alliance. Cisco Wireless products (Wireless
Controllers and Access points) using Release
7.3 will be submitted for Passpoint certification.
Wi-Fi Certified Passpoint (HS2.0) helps to ensure
simple and secure connection to public Wi-Fi
hotspots for offloading cellular data.
simple and secure connection to public Wi-Fi
hotspots for offloading cellular data.
Service provider Wi-Fi features
●
SSID/VLAN extensions in support of
multiple ISPs per WLAN and access
network segmentation (ISP sharing of
WLAN and access network)
network segmentation (ISP sharing of
WLAN and access network)
●
RADIUS and Dynamic Host Configuration
Protocol (DHCP) extensions for client
location awareness
location awareness
●
Additional authentication choices (MAC
authentication failover to dot1x
authentication)
authentication)
●
Support for general- purpose access
network features (Point-to-Point Protocol
over Ethernet [PPPoE] and Network
Address Translation-Port Address
Translation (NAT-PAT)
over Ethernet [PPPoE] and Network
Address Translation-Port Address
Translation (NAT-PAT)
Provides service providers with flexible design for
intelligent Wi-Fi-enabled networks that address
emerging business models.
intelligent Wi-Fi-enabled networks that address
emerging business models.
Voice and video features
Quality-of-service (QoS) SIP Video Snooping
(SIP CAC) for Facetime and 802.11n Voice
CAC for mobile devices
(SIP CAC) for Facetime and 802.11n Voice
CAC for mobile devices
Helps to ensure optimal quality for voice and video
while automatically mitigating congestion and
roaming challenges.
while automatically mitigating congestion and
roaming challenges.
Enhanced scale for rogue detection and
tags on Flex 7500 Series and WiSM2
tags on Flex 7500 Series and WiSM2
Flex 7500 Series:
●
Scale for Rogue access points detection
increased to 18,000 (in Release 7.3) from
12,000 (in Release 7.2)
12,000 (in Release 7.2)
●
Scale for Rogue client detection increased
to 23,000 (in Release 7.3) from 15,000 (in
Release 7.2)
Release 7.2)
●
Number of tags increased to 50,000 (in
Release 7.3) from 5000 (in Release 7.2)
WiSM2:
●
Scale for Rogue access point detection
increased to 3000 (in Release 7.3) from
2000 (in Release 7.2)
2000 (in Release 7.2)
●
Scale for Rogue client detection increased
to 4000 (in Release 7.3) from 2500 (in
Release 7.2)
Release 7.2)
●
Number of tags increased to 10,000 (in
Release 7.3) from 5000 (in Release 7.2)
Release 7.3) from 5000 (in Release 7.2)
Increased scale to align with the growing needs of
larger networks.
larger networks.