Cisco Cisco 5760 Wireless LAN Controller Referencia técnica
18
Profiling and Policy on Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Deployment Guide, Cisco IOS XE Software
Local Profiling CLI Configuration (Optional)
Configuration of Policy Maps from CLI
Creation of Policy Maps from the CLI is a set of steps:
1.
Creation of Parameter-map.
2.
Creation of Policy-map.
3.
Associating Parameter-map to Policy-map.
Creation of Parameter-map
Match Criteria Lists are equivalent to parameter maps on the CLI. Parameter maps are configured from
the CLI using the command:
the CLI using the command:
parameter-map type subscriber attribute-to-service
name
Figure 18
Parameter- map Configuration
Multiple match criteria can be added in a “match-all” fashion with the
<number> map
CLI command.
Note
For the purpose of ease and demonstration, only device parameters and VLAN attributes are used for
profiling and policy enforcement in this example.
profiling and policy enforcement in this example.
To view the parameter-maps configuration, use CLI command:
show parameter-type type subscriber attribute-to-service [name <>|all]
Figure 19
Parameter-map Configuration