Cisco Cisco 5508 Wireless Controller Referencia técnica
33
Rogue Management in a Unified Wireless Network using v7.4
Troubleshoot
Step 2
From the CLI:
(Cisco Controller) >config rogue adhoc ?
alert Stop Auto-Containment, generate a trap upon detection of the adhoc rogue.
auto-contain Automatically containing adhoc rogue.
contain Start containing adhoc rogue.
disable Disable detection and reporting of Ad-Hoc rogues.
enable Enable detection and reporting of Ad-Hoc rogues.
external Acknowledge presence of a adhoc rogue.
(Cisco Controller) >config rogue adhoc auto-contain ?
(Cisco Controller) >config rogue adhoc auto-contain
Warning! Using this feature may have legal consequences
Do you want to continue(y/n) :y
Troubleshoot
If the rogue is not detected:
Verify that rogue detection is enabled on the AP using the following command. By default, rogue
detection is enabled on the AP.
detection is enabled on the AP.
(Cisco Controller) >show ap config general Managed_AP
Cisco AP Identifier.............................. 0