Cisco Cisco 5520 Wireless Controller Referencia técnica
7
Application Visibility and Control Feature Deployment Guide rel 7.4-8.3
Configure Application Visibility
After installing the Protocol Pack the AVC pack will show as version 4.10001:
Debug Commands
(Cisco Controller) >debug avc events enable
(Cisco Controller) >debug avc error enable
Configure Application Visibility
Complete these steps:
1.
Open a web browser on the Wired Laptop. Enter your WLC IP Address.
2.
Create an OPEN WLAN with naming convention as for example: “POD1-Client” and enable Application Visibility on
that WLAN under QOS TAB. Map this WLAN to management interface.
that WLAN under QOS TAB. Map this WLAN to management interface.
To enable Application visibility, click WLAN ID and then click the QOS tab and check the enable option for
Application Visibility and click Apply.
Application Visibility and click Apply.