Cisco Cisco 5520 Wireless Controller Referencia técnica

Join Pending: When a member controller is waiting to complete and exit from one RRM state and 
join as a member to another RRM state.

Not a Manager: When a RF group member is wrongly being acknowledged as a RF leader. (Unlikely 
scenario)

RRM Assigning: In progress

Grouping disabled: When RF Grouping is not enabled (switched “OFF”) on the controller that this 
message is displayed for.

Invalid Protocol Version: If the RF member controller image is of an incompatible version or if there 
is a version mismatch. 

Country code mismatch: Configured country code on the WLC does not match other WLCs in the 
RF group.

Invalid hierarchy: This error occurs when a lower priority controller tries to add a higher priority 
controller.

Already a static leader: Trying to add a member who is already been manually configured to be a 
static leader.

Already Static Member: This error message occurs when RF Group Leader tries to add a member 
who has already been accepted as a static member by another RF leader.

Non-Static Member

Not Intended

Member Deletion Error: The error is specifically known to occur due to improper memory allocation 
or de-allocation. 

RF-domain mismatch: If the RF domain of the configured member and the RF leader does not 
match.

Split for invalid-state request: This error state occurs if there is a member split because of a RRM 
state transition that was not expected.

Transitioning to static from auto: While moving from auto to static state.

Split due to user action: When there is a user triggered transition because of reset while modifying 
country code, sys-name change, or other user actions.

Switch Size Exceeded