Cisco Cisco Clean Access 3.5
12-10
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 12 Implement High Availability (HA) Mode
Configure High Availability
e. Reboot the Primary Server
9.
Reboot the Clean Access Server from either the CAS direct access interface (Network Settings >
Failover > Reboot button) or from the CAM web console (Administration > CCA Manager >
Network & Failover > Reboot button).
Failover > Reboot button) or from the CAM web console (Administration > CCA Manager >
Network & Failover > Reboot button).
10.
In the CAM web console, add the CAS to the List of Servers in the Clean Access Manager using the
Service IP for the cluster (172.16.1.4) as the Server IP address.
Service IP for the cluster (172.16.1.4) as the Server IP address.
11.
Configure any other settings desired, such as DHCP settings, to control the runtime behavior of the
CAS.
CAS.
Test the configuration by trying to log into the untrusted (managed) network from a computer connected
to the untrusted interface of the Clean Access Server. Proceed to the next step only if you can
successfully access the network.
to the untrusted interface of the Clean Access Server. Proceed to the next step only if you can
successfully access the network.