Cisco Cisco Email Security Appliance C650 Referencia técnica
3-25
CLI Reference Guide for AsyncOS 10.0 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
Configuration File Management
mailconfig
Description
To test the configuration, you can use the
mailconfig
command immediately to send a test email
containing the system configuration data you just created with the
systemsetup
command.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command can be used in all three machine modes (cluster, group, machine).
Batch Command: This command does not support a batch format
Example
mail.example.com> mailconfig
Please enter the email address to which you want to send the configuration file.
Separate multiple addresses with commas.
[]> user@example.com
Choose the passphrase option:
1. Mask passphrases (Files with masked passphrases cannot be loaded using loadconfig
command)
2. Encrypt passphrases
3. Plain passphrases
[1]> 2
The configuration file has been sent to user@example.com.
Send the configuration to a mailbox to which you have access to confirm that the system is able to send
email on your network.
email on your network.
resetconfig
Description
When physically transferring the appliance, you may want to start with factory defaults. The
r
r
esetconfig
command resets all configuration values to factory defaults. This command is extremely
destructive, and it should only be used when you are transferring the unit or as a last resort to solving
configuration issues. It is recommended you run the
configuration issues. It is recommended you run the
systemsetup
command after reconnecting to the
CLI after you have run the
resetconfig
command.
Note
The
resetconfig
command only works when the appliance is in the offline state. When the
resetconfig
command completes, the appliance is automatically returned to the online state, even before you run the
systemsetup
command again. If mail delivery was suspended before you issued the
resetconfig
command, the mail will attempt to be delivered again when the
resetconfig
command completes.