Cisco Cisco Aironet 1810w Guía De Instalación

<Netmask> is the subnet mask, such as 255.255.255.0

<Default router> is the IP address of the default router, such as 10.0.0.1

<DNS Server> is the IP address of the DNS server, such as 10.0.10.2

Add the option 43 line using the following syntax: 

 <hex string> 

The hex string is assembled by concatenating the TLV values shown below: 

Type + Length + Value 

Type is always f1(hex). Length is the number of controller management IP addresses times 4 
in hex. Value is the IP address of the controller listed sequentially in hex. 

For example, suppose that there are two controllers with management interface IP addresses, 
10.126.126.2 and 10.127.127.2. The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP 
addresses translate to 0a7e7e02 and 0a7f7f02. Assembling the string then yields 
f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43 hex 
f1080a7e7e020a7f7f02.

All user documentation for the Cisco Aironet 1850 series access point is available at the following 
URL:

For detailed information and guidelines for configuring and deploying your access point in a wireless 
network, see the following documentation:

Cisco Wireless LAN Controller Configuration Guide, Release 8.1, at the following URL:

Cisco Aironet 1850 Series Access Point Deployment Guide, at the following URL: