Cisco Cisco Aironet 1810w Guía De Instalación

This guide provides instructions on how to install and configure your Cisco Aironet 1850 Series Access 
Point. This guide also provides mounting instructions and limited troubleshooting procedures.

The 1850 Series Access Point is referred to as the access point, or abbreviated as AP in this document.

The Cisco Aironet 1850 series access point is an 802.11 a/b/g/n/ac (Wave 2) access point, with both 
external antenna (AP1852E) and internal antenna (AP1852I) models. This access point can be 
mounted on a wall or a ceiling, and supports 2.4 GHz 3x4 802.11b/g/n MIMO and 5 GHz 4x4 802.11 
a/n/ac (Wave 2) MIMO applications simultaneously.

The Cisco Aironet 1850 series access point comes in both universal regulatory domain and 
non-universal regulatory domain model number formats. See the following table for the model number 
formats. 

The ‘UX’ in a model number indicates a universal regulatory domain access point. For information on 
how to set the regulatory domain and country configurations of a universal regulatory domain access 
point, see the Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide, at:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

The ‘x’ placeholder in the other model numbers represents the regulatory domain. The ‘x’ can be any 
one of these supported regulatory domains: A, B, C, D, E, F, H, I, K, N, Q, R, S, T, Z. 

For more information on supported regulatory domains, see the following page:

AIR-AP1852E-UXK9

AIR-AP1852E-UXK9C

AIR-AP1852E-x-K9

AIR-AP1852E-x-K9C

AIR-AP1852I-UXK9

AIR-AP1852I-UXK9C

AIR-AP1852I-x-K9

AIR-AP1852I-x-K9C