Cisco Cisco Aironet 1810w Guía De Instalación
7
Caution
This product and all interconnected equipment must be installed indoors within the same
building, including the associated LAN connections as defined by Environment A of the
IEEE 802.3af/at Standard.
building, including the associated LAN connections as defined by Environment A of the
IEEE 802.3af/at Standard.
Note
The access point is suitable for use in environmental air space in accordance with section
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of
the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or
power injector in air handling spaces.
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of
the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or
power injector in air handling spaces.
Note
Use only with listed Information Technology Equipment (ITE) equipment. For more
information on ITE equipment, refer to article 645 of the latest National Electrical Code
(NEC).
information on ITE equipment, refer to article 645 of the latest National Electrical Code
(NEC).
4
Unpacking the AP
To unpack the access point, follow these steps:
Step 1
Unpack and remove the access point and the mounting accessories and antennas, if included
for external antenna model access points, from the shipping box.
for external antenna model access points, from the shipping box.
Step 2
Return any packing material to the shipping container and save it for future use.
Step 3
Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
your Cisco representative or reseller for instructions.
–
The access point
–
Mounting bracket (AIR-AP-BRACKET-1= or AIR-AP-BRACKET-2=, only if selected when
you ordered the access point)
you ordered the access point)
–
T-RAIL clips and Channel Adapter (only if selected when you ordered the access point)