Cisco Cisco Email Security Appliance C160 Referencia técnica
3-78
CLI Reference Guide for AsyncOS 10.0 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
General Management/Administration/Troubleshooting
•
Reset and delete the reporting database
•
Enable reporting daemons
•
Disable reporting daemons
•
Reset and delete the tracking database
•
Reset configuration to the initial manufacturer values
Example: Displaying and Clearing Caches
The following example shows the diagnostic command used to display the contents of the ARP cache
and to flush all network related caches.
and to flush all network related caches.
mail.example.com> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
[]> network
Choose the operation you want to perform:
- FLUSH - Flush all network related caches.
- ARPSHOW - Show system ARP cache.
- NDPSHOW - Show system NDP cache.
- SMTPPING - Test a remote SMTP server.
- TCPDUMP - Dump ethernet packets.
[]> arpshow
System ARP cache contents:
(10.76.69.3) at 00:1e:bd:28:97:00 on em0 expires in 1193 seconds [ethernet]
(10.76.69.2) at 00:1e:79:af:f4:00 on em0 expires in 1192 seconds [ethernet]
(10.76.69.1) at 00:00:0c:9f:f0:01 on em0 expires in 687 seconds [ethernet]
(10.76.69.149) at 00:50:56:b2:0e:2b on em0 permanent [ethernet]
Choose the operation you want to perform:
- FLUSH - Flush all network related caches.
diagnostic reporting deletedb
diagnostic reporting enable
diagnostic reporting disable
diagnostic tracking deletedb
diagnostic reload