Cisco Cisco Email Security Appliance X1070 Referencia técnica
3-168
CLI Reference Guide for AsyncOS 10.0 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
Networking Configuration / Network Tools
Enter the name or number of the ethernet interface you wish to edit.
[]> 2
Please enter a non-default (1500) MTU value for the Data 2 interface.
[]> 1200
Ethernet interfaces:
1. Data 1 default mtu 1500
2. Data 2 mtu 1200
3. Management default mtu 1500
4. VLAN 12 default mtu 1500
Choose the operation you want to perform:
- EDIT - Edit an ethernet interface.
[]>
interfaceconfig
Description
Configure the interface. You can create, edit, or delete interfaces. You can enable FTP, change an IP
address, and configure Ethernet IP addresses.
address, and configure Ethernet IP addresses.
Usage
Commit: This command requires a ‘commit’.
Cluster Management: This command is restricted to machine mode.
Batch Command: This command supports a batch format.
Batch Format
The batch format of the
interfaceconfig
command can be used to perform all the fuctions of the
traditional CLI command.
•
Creating a new interface
interfaceconfig new <name>
<ethernet interface>
<hostname>
--ip=IPv4 Address/Netmask
--ip6=IPv6 Address/Prefix Lenght
[--ftp[=<port>]]
[--telnet[=<port>]]
[--ssh[=<port>]]